Abby Hook's Embellished Hook Clasp, Findings & Components, Toggles & Clasps, Earwire & Headpin. Lashing, Wire Lashing, Wire Wrapping, Wrapping, Wire Wrapping Jewelry. Being able to make your own components for your jewelry not only makes the item truly handmade, it also means that you can co-ordinate your jewelry as well as using up all those scraps of wire!<br />
This is a very robust clasp and yet due to its sleekness is also very stylish!<br />
This clasp measures 1 from the top of the curve to the bottom of the loop and 1/2 wide.
Embellished Hook Clasp
by Abby Hook
  • Category: Findings
  • Technique(s): Lashing, Wrapping
  • Skill Level: Beginner
Being able to make your own components for your jewelry not only makes the item truly handmade, it also means that you can co-ordinate your jewelry as well as using up all those scraps of wire!
This is a very robust clasp and yet due to its sleekness is also very stylish!
This clasp measures 1 from the top of the curve to the bottom of the loop and 1/2 wide.

Materials

28 Gauge Round Dead Soft Copper Wire
H11-28D
  • Lesson Quantity: 12.00 inches
  • Purchase Quantity: 1.00 1FT
  • Price: $0.15
  • Gold Club Price: $0.11
Out of Stock
12 Gauge Round Dead Soft Copper Wire
H11-12D
  • Lesson Quantity: 3.00 inches
  • Purchase Quantity: 1.00 1FT
  • Price: $1.54
  • Gold Club Price: $1.15
Add to Bag
Amethyst 4mm Round Beads - 8 Inch Strand
A1-634
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $6.67
  • Gold Club Price: $5.00
Out of Stock
Add All Items to Cart

Tools

Round Nose Wire Plier
G2-507
  • G2-507
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $32.95
  • Gold Club Price: $24.71
Add to Bag
Chain Nose Wire Plier
G2-508
  • G2-508
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $32.95
  • Gold Club Price: $24.71
Add to Bag
Flat Nose Nylon Flat Jaw With Spring
PLR-831.00
  • PLR-831.00
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $13.80
  • Gold Club Price: $10.35
Add to Bag
C.H.P Milano Italian Flush Cutter, 5 1/2 Inches
PLR-487.00
  • PLR-487.00
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $14.97
  • Gold Club Price: $11.23
Add to Bag
Steel and Rubber Bench Block 2.5X2.5 Inches
G17-22
  • G17-22
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $21.97
  • Gold Club Price: $16.48
Add to Bag
Flat Face Chasing Hammer
HAM-161.00
  • HAM-161.00
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $14.97
  • Gold Club Price: $11.23
Add to Bag
6 Piece Assorted File Set with Wooden Handle
G14-7
  • G14-7
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $5.57
  • Gold Club Price: $4.18
Add to Bag
Add All Items to Cart
Instructions
Step 1:
Prepare the wire
Cut a 3” length of 12 gauge wire. Straighten by grasping one end with the chain nose pliers and pulling the length through the nylon jaw pliers a couple of times.
Pro Tip: Check that your tools (especially your wire cutters) are suitable to use with 12 gauge (2mm) wire before starting, so that you do not damage them.
Abby Hook's Embellished Hook Clasp - Prepare the wire, Findings & Components, Toggles & Clasps, Earwire & Headpin, Lashing, Wire Lashing, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, cut a piece of wire
Step 2:
Form a loop
Hold one end of the wire with the round-nose pliers and guide the wire around the jaw with your thumb on your less dominant hand.

Pro Tip: Be careful when working with heavy gauge wire which, due to its thickness, is more difficult to shape than thinner gauges. You need to make sure that you do not strain your hands and wrists. Do not over stretch: re-position your tools often, rather than over turning your wrist.
Notice how the loop is currently more egg shaped than round.
Abby Hook's Embellished Hook Clasp - Form a loop, Findings & Components, Toggles & Clasps, Earwire & Headpin, Lashing, Wire Lashing, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, make a loop
Abby Hook's Embellished Hook Clasp - Form a loop, Findings & Components, Toggles & Clasps, Earwire & Headpin, Lashing, Wire Lashing, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, egg shaped loop
Step 3:
Make the loop round
Snip the corner off the wire by holding the wire cutters at a 90° angle to the straight wire as shown.
Notice how there is a tapered edge on the end of the wire now.
File the wire end smooth. Close the loop to make it round.
Abby Hook's Embellished Hook Clasp - Make the loop round, Findings & Components, Toggles & Clasps, Earwire & Headpin, Lashing, Wire Lashing, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, trim a corner off the wire
Abby Hook's Embellished Hook Clasp - Make the loop round, Findings & Components, Toggles & Clasps, Earwire & Headpin, Lashing, Wire Lashing, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, tapered edge
Abby Hook's Embellished Hook Clasp - Make the loop round, Findings & Components, Toggles & Clasps, Earwire & Headpin, Lashing, Wire Lashing, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, close the loop
Step 4:
Shape the hook
Grasp the wire with the round nose pliers with the thickest part of the jaws, just after the loop.
Shape the wire around the jaw, forming a hook.
Abby Hook's Embellished Hook Clasp - Shape the hook, Findings & Components, Toggles & Clasps, Earwire & Headpin, Lashing, Wire Lashing, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, grasp the wire with round nose pliers
Abby Hook's Embellished Hook Clasp - Shape the hook, Findings & Components, Toggles & Clasps, Earwire & Headpin, Lashing, Wire Lashing, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, shape the hook
Step 5:
Hammer the wire
The clasp is hammered not only to add contrast in textures but also to harden the metal. Lay the clasp on your bench block or anvil and carefully hammer the outer edge of the loop
Notice how hammering the outer edge increases the length thus forcing the loop to tighten. If you were to hammer the inner edge, the loop would open.
Also hammer the curve of the hook. This time keeping the hammer head perfectly flat, so that the whole face of the wire is hammered evenly.
Abby Hook's Embellished Hook Clasp - Hammer the wire, Findings & Components, Toggles & Clasps, Earwire & Headpin, Lashing, Wire Lashing, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, hammer the hook
Abby Hook's Embellished Hook Clasp - Hammer the wire, Findings & Components, Toggles & Clasps, Earwire & Headpin, Lashing, Wire Lashing, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, hammer the hook
Step 6:
Shape the end of the wire
Position the end of the wire at a 90° angle to the bench block and carefully hammer the end so that it flares outwards.
Also carefully bend the hook upwards as you hammer to create a gentle curve in the hook.
Abby Hook's Embellished Hook Clasp - Shape the end of the wire, Findings & Components, Toggles & Clasps, Earwire & Headpin, Lashing, Wire Lashing, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, hammer the tip
Abby Hook's Embellished Hook Clasp - Shape the end of the wire, Findings & Components, Toggles & Clasps, Earwire & Headpin, Lashing, Wire Lashing, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, hammer the tip
Abby Hook's Embellished Hook Clasp - Shape the end of the wire, Findings & Components, Toggles & Clasps, Earwire & Headpin, Lashing, Wire Lashing, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, bend the tip up
Step 7:
File and sand
Using the file, shape the end into a smooth curve.
Starting with the roughest grit, sand any filing or tool marks out of the wire. Work each successive grit in the opposite direction to the previous one.
The clasp can be used like this or continue following the steps to embellish it.
Abby Hook's Embellished Hook Clasp - File and sand, Findings & Components, Toggles & Clasps, Earwire & Headpin, Lashing, Wire Lashing, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, file the hook
Step 8:
Attach a 28g piece of wire
If you would like to add some color to the clasp, coordinating it with your jewelry, follow the next steps.
Cut a piece of 28 gauge wire 15” long and attach it to the clasp by coiling 3 times, just after the loop, leaving a 1” tail to hold onto.
Coil another 10 times.
Abby Hook's Embellished Hook Clasp - Attach a 28g piece of wire, Findings & Components, Toggles & Clasps, Earwire & Headpin, Lashing, Wire Lashing, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, wrap the 28g wire around the hook
Abby Hook's Embellished Hook Clasp - Attach a 28g piece of wire, Findings & Components, Toggles & Clasps, Earwire & Headpin, Lashing, Wire Lashing, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, coil 10 times
Step 9:
Attach a bead
Thread a 4mm bead onto the 28 gauge wire and coil the clasp 3 times to secure the bead in place.
Abby Hook's Embellished Hook Clasp - Attach a bead, Findings & Components, Toggles & Clasps, Earwire & Headpin, Lashing, Wire Lashing, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, attach a bead to the hook
Step 10:
Secure the bead
To hold the bead firmly in place, wrap the base of the bead 3 times, pulling tightly.
Coil underneath the bead 8 times to fill the gap in the existing coils.
Trim the 28 gauge wire so that the end is on the outer edge of the clasp and tuck in by carefully grasping the frame with the chain nose pliers and using a twisting motion, in the same direction as the coils, flattening the 28 gauge wire against the frame, securing it in place.

You are done!

Abby Hook's Embellished Hook Clasp - Secure the bead, Findings & Components, Toggles & Clasps, Earwire & Headpin, Lashing, Wire Lashing, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, secure the bead
Abby Hook's Embellished Hook Clasp - Secure the bead, Findings & Components, Toggles & Clasps, Earwire & Headpin, Lashing, Wire Lashing, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, coil underneath the bead
Abby Hook's Embellished Hook Clasp - Secure the bead, Findings & Components, Toggles & Clasps, Earwire & Headpin, Lashing, Wire Lashing, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, finished hook clasp