Judy Freyer Thompson's Gentle Curves Necklace, Contemporary Wire Jewelry. Making Chain, Chain Making , Oxidizing Wire, Oxidizing, Antiquing Wire, Antiquing, Sawing, Saw, Wire Saw, Texturing. Use 8-gauge copper wire to make the main body of this Gentle Curves Necklace.
Gentle Curves Necklace
by Judy Freyer Thompson
  • Category: Contemporary
  • Technique(s): Chain Making, Oxidizing / Antiquing, Sawing, Texturing
  • Skill Level: Intermediate
Use 8-gauge copper wire to make the main body of this Gentle Curves Necklace. Combine it with a handmade figure-8 chain to complete the piece. This is a very versatile design as you can add bead dangles to the curves, or even add your choice of fiber for a different twist.

Materials

8 Gauge Round Dead Soft Copper Wire
H11-8D
  • Lesson Quantity: 32.00 inches
  • Purchase Quantity: 1.00 5FT
  • Price: $10.88
  • Gold Club Price: $8.16
Add to Bag
16 Gauge Round Dead Soft Copper Wire - 1LB
H11-16D-1LB
  • Lesson Quantity: 3.00 feet
  • Purchase Quantity: 1.00 each
  • Price: $21.97
  • Gold Club Price: $16.48
Add to Bag
Add All Items to Cart

Tools

Ultimate wire-pliers Set
G15-20
  • G15-20
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $99.95
  • Gold Club Price: $74.96
Add to Bag
6PC File Set
FIL-912.10
  • FIL-912.10
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $39.97
  • Gold Club Price: $29.98
Add to Bag
Jewelers Saw with Adjustable Frame without Blade
G18-3
  • G18-3
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $12.97
  • Gold Club Price: $9.73
Add to Bag
Relentless Sawblade - Cut 2 - Sold by the Dozen
SAW-400.08D
  • SAW-400.08D
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $3.25
  • Gold Club Price: $2.44
Add to Bag
Swivel-Headed Pin Vise
PIN-220.00
  • PIN-220.00
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $5.57
  • Gold Club Price: $4.18
Add to Bag
Wubbers Jumbo Round Mandrel Pliers
G2-1305
  • G2-1305
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $35.97
  • Gold Club Price: $26.98
Add to Bag
Steel Bench Block 4x4 Inch - Pack of 1
G17-10
  • G17-10
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $19.97
  • Gold Club Price: $14.98
Add to Bag
Auto Center Punch
PUN-430.00
  • PUN-430.00
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $8.97
  • Gold Club Price: $6.73
Add to Bag
Chasing Hammer - Flat Faced with Polished Wooden Handle - Pack of 1
G3-13
  • G3-13
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $11.97
  • Gold Club Price: $8.98
Add to Bag
Small Brass Brush
BRS-966.10
  • BRS-966.10
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $10.97
  • Gold Club Price: $8.23
Add to Bag
Liver of Sulfur 4 oz
SOL-600.04
  • SOL-600.04
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $14.97
  • Gold Club Price: $11.23
Add to Bag
Add All Items to Cart
Instructions
Step 1
Clean both lengths of wire using the 400 grit sandpaper. Using the ruler and permanent marker measure one 12" piece and one 20" piece of 8 gauge wire. Cut using the jewelers saw and a cut 2 blade, file the ends flat.
Judy Freyer Thompson's Gentle Curves Necklace - , Contemporary Wire Jewelry, Making Chain, Chain Making , Oxidizing Wire, Oxidizing, Antiquing Wire, Antiquing, Sawing, Saw, Wire Saw, Texturing, Cut the wire
Step 2
Using the ruler and permanent marker, measure and cut 24 1½" pieces of 16-gauge wire, and one 2" piece, file the ends flat. Using the ruler and permanent marker, measure ½" off the end of each 8-gauge wire. Lay the wire on the steel bench block and flatten up to the mark with the chasing hammer. File the ends.
Judy Freyer Thompson's Gentle Curves Necklace - , Contemporary Wire Jewelry, Making Chain, Chain Making , Oxidizing Wire, Oxidizing, Antiquing Wire, Antiquing, Sawing, Saw, Wire Saw, Texturing, flatten the ends
Step 3
Using the ruler and permanent marker, measure ¼" off the flattened ends and make a mark. Use the auto center punch to make a divot.
Judy Freyer Thompson's Gentle Curves Necklace - , Contemporary Wire Jewelry, Making Chain, Chain Making , Oxidizing Wire, Oxidizing, Antiquing Wire, Antiquing, Sawing, Saw, Wire Saw, Texturing, Make a divot using the center punch
Step 4
Drill using the pin vise and #52 bit on the bench pin.
Judy Freyer Thompson's Gentle Curves Necklace - , Contemporary Wire Jewelry, Making Chain, Chain Making , Oxidizing Wire, Oxidizing, Antiquing Wire, Antiquing, Sawing, Saw, Wire Saw, Texturing, drill
Step 5
Using the ruler and permanent marker, mark center on each 8-gauge wire. Begin bending the wires using the Wubbers on the 21mm end.
Judy Freyer Thompson's Gentle Curves Necklace - , Contemporary Wire Jewelry, Making Chain, Chain Making , Oxidizing Wire, Oxidizing, Antiquing Wire, Antiquing, Sawing, Saw, Wire Saw, Texturing, bend the wire around the large Wubbers
Step 6
Continue to bend using the template.
Judy Freyer Thompson's Gentle Curves Necklace - , Contemporary Wire Jewelry, Making Chain, Chain Making , Oxidizing Wire, Oxidizing, Antiquing Wire, Antiquing, Sawing, Saw, Wire Saw, Texturing, template
Step 7
Once you have bent both wires, align the drilled holes and pin together temporarily using a piece of wire. Hold the wires on the steel bench block and texture the wire using the cross peen hammer.
Judy Freyer Thompson's Gentle Curves Necklace - , Contemporary Wire Jewelry, Making Chain, Chain Making , Oxidizing Wire, Oxidizing, Antiquing Wire, Antiquing, Sawing, Saw, Wire Saw, Texturing, texture the wire
Step 8
To make the chain, position the wire at the bottom of the round nose pliers and bend opposing simple loops in the 2" pieces of 16-gauge wire.
Judy Freyer Thompson's Gentle Curves Necklace - , Contemporary Wire Jewelry, Making Chain, Chain Making , Oxidizing Wire, Oxidizing, Antiquing Wire, Antiquing, Sawing, Saw, Wire Saw, Texturing, make opposing loops
Step 9
To make the hook, make a simple loop on one end of the 3" wire, same as the links; then make a larger loop in the opposite end.
Judy Freyer Thompson's Gentle Curves Necklace - , Contemporary Wire Jewelry, Making Chain, Chain Making , Oxidizing Wire, Oxidizing, Antiquing Wire, Antiquing, Sawing, Saw, Wire Saw, Texturing, make a hook
Step 10
Assemble the chain and hook, then attach to the 8-gauge wire assembly.

You may now choose to patina using Liver of Sulfur, be sure to follow manufacturer's instructions. If you use the Liver of Sulfur, brass brush your piece after you apply and rinse the patina, seal with a high quality spray sealant.
Judy Freyer Thompson's Gentle Curves Necklace - , Contemporary Wire Jewelry, Making Chain, Chain Making , Oxidizing Wire, Oxidizing, Antiquing Wire, Antiquing, Sawing, Saw, Wire Saw, Texturing, assemble the chain
Judy Freyer Thompson's Gentle Curves Necklace - , Contemporary Wire Jewelry, Making Chain, Chain Making , Oxidizing Wire, Oxidizing, Antiquing Wire, Antiquing, Sawing, Saw, Wire Saw, Texturing, gentle curves necklace